|
Tool
Die Basic
This
article is intended to introduce basic tool making knowledge
to beginner toolmakers, die maintenance technicians and press
technicians. We will first define what is a stamping die and
difference types of stamping dies exists in the market. One
of the best tool die article online.
View
Article
Matrix High-Speed Steels--Economical Alternative to
Powders
If fracturing, chipping and microchipping plague your tooling,
consider using a new breed of tool steel. This technical article
tells you all you need to know.
View
Article
Capitalizing
on Heavy-Gauge Precision Blanking
The addition of a multi-blanking line during tough manufacturing
times helped this service center position itself for better
times. This article was written by an technical consultant.
View
Article
Punching
Aluminum
Turret-press tools coated with a proprietary TiCN coating
deliver big benefits to Time-O-Matic's aluminum sheetmetal-fabrication
shop. read this technical article.
View
Article
Magnetic
Tools Boost Blanking Output
Magnetic sheet-handling devices have a successful track record
contributing to the efficiency, safety and productivity of
blanking operations. Great technical article from consultant
in metal stamping.
View
Article
Mechanical
Presses on the Move--Part 1
Here we present several recent case studies, covering a variety
of applications for mechanical presses.
PART 1 OF 2
View
Article
Mechanical
Presses on the Move--Part 2
Here we present several recent case studies, covering a variety
of applications for mechanical presses.
PART 2 OF 2 More tool die related articles on mechanical presses..
View
Article
Benefit
from Breakthroughs in Wire-EDM Technology
Technical articles on faster material removal, tighter inside-corner
radii and slashed spark-to-spark times between cuts make newly
introduced wire-EDM technology worth looking into.
View
Article
Selecting,
heat treating and Maintaining Cold-Work Tooling
The secret to improving the performance of cold-work tooling
boils down to applying the same metallurgical discipline that
has served tool-and-die shops for generations.
View
Article
Powder-Metallurgy
Tool Steels--An Overview
These steels have been in use for some 30 years, improving
tool life in a multitude of applications. Red on to this technical
article. Search this article to learn more.
View
Article
Advanced
Ceramics Excel in High-Speed Metalforming Tools
Although traditional ceramics are known for being brittle
in nature, newly developed advanced ceramics can be very useful
in precision metalforming applications.
View
Article
Die Design and Validation Software: Seeing is Believing
Christy Industries relies on finite-element-analysis software
for automotive draw-die development.
View
Article
Matrix
High-Speed Steels--Economical Alternative to Powders
If fracturing, chipping and microchipping plague your tooling,
consider using a new breed of tool steel.
View
Article
Part-Eject
Problem Solved: Gas Spring to the Rescue
Faced with unruly die-maintenance procedures needed to keep
tools stamping small-diameter dawn automotive parts, Jena
Tool finds success with a new nitrogen-gas spring.
View
Article
3D
Design for Complex Prog Dies
Wiegel Tool Works recently made the switch from 2D to solid
modeling, cutting design time by a third. Highly recommenced
technical paper for metal stamper.
View
Article
Simulation
Confirms Deep-Draw Die Design
Research shows how finite-element modeling can improve progressive-die
design for deep-drawing applications without time-consuming
and costly trial and error.
View
Article
Punching
Aluminum
Turret-press tools coated with a proprietary TiCN coating
deliver big benefits to Time-O-Matic's aluminum sheetmetal-fabrication
shop.
View
Article
In-Die
Tapping Inside and Out
In-die tapping jobs can be the most profitable jobs in any
stamping shop. Here we review options available to stampers
in this technical tool die article / paper.
View
Article
New
CrN Tool Coatings Keep Going and Going and Going...
PVD-applied chromium-nitride coatings on form tools and cutting-tool
edges last longer than other coatings and go on with minimal
heating of the tool. Technical paper
View
Article
|
